Polygon vs Ethereum: где вы должны запустить свой проект NFT?
При создании новой коллекции NFT в OpenSea вы можете выбрать блокчейн, на котором она будет запущена. Это блокчейны Polygon или Ethereum.
Выбор одного из этих блокчейнов — важное решение, и, если его не принять должным образом, ваш проект NFT может разрушиться еще до того, как он станет публичным.
Сразу скажу, что в нашем телеграмм канале «NFT БРИХАСПАТИ» Вы сможете найти перспективные NFT проекты, раздачи от бирж, а также много другой полезной информации.. На любые Ваши вопросы отвечаем в телеграмм!
Так же занимаемся продвижением NFT коллекцией, написанием смарт-контрактов и их аудитом
Ethereum — это блокчейн, в котором запускаются NFT. NFT чеканятся на блокчейне. Когда эти NFT чеканятся или покупаются, транзакция должна быть одобрена.
Для одобрения транзакции требуется энергия, а использование блокчейна Ethereum означает, что вы должны платить за энергию через механизм под названием Gas Fee .
Между платой за газ и спросом существует линейная зависимость; следовательно, чем выше спрос, тем выше плата за газ, и наоборот. Кроме того, эти сборы выше в часы пик; следовательно, рекомендуется чеканить в более медленное время дня, чтобы получить NFT по более низкой цене.
Со временем появились жалобы на перегрузку из-за одновременной отправки нескольких транзакций в блокчейне ethereum. Таким образом, плата за газ становится дороже!
Именно здесь на помощь приходит Polygon, предлагая решения самой большой проблемы Ethereum.
Polygon — это боковая цепь или решение уровня 2 для ETH., который позволяет вам развертывать смарт-контракты Ethereum, хотя вместо развертывания в ETH вы развертываете в полигональной сети.
Мы можем легко сделать вывод, что эфириум является основной цепью, а Polygon — боковой цепью.
Существует своего рода мост, который соединяет эти две цепи. Этот мост преобразует активы из одной цепочки в другую, блокируя актив с одной стороны и разблокируя его с другой стороны.
Чтобы лучше понять это сравнение, нам нужно обсудить самую большую разницу между этими блокчейнами.
Одно уникальное ценностное предложение Polygon заключается в том, что вам не нужно платить безумные сборы за газ, чтобы создать NFT.
Плата за газ, непосредственно связанная с использованием Polygon в OpenSea, не взимается. Однако, чтобы купить NFT на Polygon, вам все равно нужно косвенно оплачивать комиссию за газ, потому что NFT на блокчейне Polygon можно приобрести только через Polygon ETH.
Однако, чтобы получить Polygon ETH, вам необходимо подключить ETH к Polygon, а для этого вам нужно заплатить комиссию за газ. Так что технически с Polygon взимается плата за газ, но это менее затратно.
С другой стороны, с ETH связано много комиссий за газ, поэтому люди с небольшими портфелями не могут совершать какие-либо свопы.
Эти платежи за газ можно разделить на разовые и повторяющиеся платежи .
Единовременные сборы подразделяются на сборы за инициализацию и сборы за одобрение аукциона.
Вам необходимо заплатить единовременный сбор за инициализацию, когда вы решите продать NFT на Эфириуме через OpenSea. Эта плата не является фиксированной, так как зависит от текущей платы за газ.
Одна замечательная особенность OpenSea заключается в том, что вы можете выставить NFT на аукцион вместо того, чтобы продавать его по фиксированной цене. Однако для аукциона NFT вам необходимо одобрить использование специального токена под названием WETH (Wrapped ETH).
В блокчейне ethereum есть много повторяющихся комиссий. Эти сборы взимаются каждый раз, когда вы принимаете предложение аукциона, переводите NFT, покупаете NFT, отменяете листинг NFT, отменяете ставку и конвертируете WETH в ETH.
В среднем эти сборы стоят от 50 до 200 долларов.
Практически невозможно получить идеальный продукт. Ниже приведены некоторые компромиссы, связанные с Polygon:
1. Нет аукционов
В OpenSea вы можете продавать свои NFT с аукциона вместо того, чтобы выставлять их по фиксированной цене.
Вы можете продать его с аукциона тому, кто предложит самую высокую цену, что увеличит ваши шансы на продажу по более выгодной цене.
Однако это доступно только в блокчейне ETH. Polygon в настоящее время работает над тем, чтобы добавить это в свой блокчейн.
2. Менее безопасный
Это не означает, что блокчейн полигонов вообще небезопасен. Это просто означает, что он менее безопасен по сравнению с эфириумом.
3. Менее знакомый
70% любителей NFT слышали об ETH, менее 30% слышали о Polygon. Тем не менее, в последнее время Polygon получил некоторое признание, и это только вопрос времени, когда он станет более популярным.
Использование Polygon в первый раз может быть затруднено для новичков и нетехнических людей, потому что не все знают, как подключить ETH к Polygon.
Следовательно, если вы запускаете свой NFT на блокчейне Polygon, рекомендуется предоставить пошаговое руководство о том, как выполнить переход.
Polygon — лучший блокчейн для запуска проекта NFT с высокочастотными транзакциями с низкой стоимостью. С другой стороны, ETH — лучший блокчейн-проект NFT с низкой частотой и высокой стоимостью транзакций.
Следовательно, если вы запускаете от 7 000 до 10 000 рисунков NFT, я предлагаю вам рассмотреть возможность запуска на Polygon.
Кроме того, если вы уверены, что ваши NFT будут распроданы, даже если они дорогие, вы можете выбрать Ethereum. Однако, если вы хотите сэкономить деньги, вам следует подумать о Polygon.
Я заметил, что серьезные проекты выбирают блокчейн ETH, потому что эти сборы за газ создают барьер для входа, следовательно, не допускают новых и несерьезных инвесторов. Кроме того, поскольку вы должны платить комиссию за газ, чтобы продать свои NFT, это стимулирует удерживать ваши NFT.
Polygon уже доказал, что низкие затраты в сочетании с более быстрыми транзакциями в блокчейне Ethereum возможны.
На любые Ваши вопросы отвечаем в телеграмм, помимо этого у нас проходит войс чат, в котором обсуждаем насущные вопросы по перспективам развития в криптовалютном мире
Polygon vs Ethereum: Where you should launch your NFT project?
You are probably reading this article because you are launching an exciting NFT project soon, or you are probably curious about what the subject means. Regardless of your intentions, I’m happy to say you are on the right page.
When creating a new NFT collection on OpenSea, you get to choose a blockchain where it will be launched. These blockchains are either Polygon or Ethereum.
Choosing one of these blockchains is a big decision and, if not made properly, could ruin your NFT project even before it goes public.
A Quick Recap
Ethereum is a blockchain where NFTs are launched. NFTs are minted on a blockchain. When these NFTs are minted or purchased, the transaction must be approved.
The approval of a transaction needs energy, and using an Ethereum blockchain means you have to pay for the energy through a mechanism called Gas Fee.
There exists a linear relationship between gas fee and demand; hence the higher the demand, the higher the gas fee, and vice versa. Moreover, these Fees are higher during busy times; hence it’s advisable to mint during the slower times of the day to get to the NFT at a lower price.
Over time, there have been complaints of congestion due to multiple transactions submitted simultaneously on the ethereum blockchain. Hence making the gas fee expensive!
This is where Polygon comes in to save the day, providing solutions to Ethereum’s biggest problem.
Polygon is a side chain or Layer 2 solution to ETH, which allows you to deploy Ethereum Smart Contracts, although instead of deploying to ETH, you deploy to a polygon network.
We can easily conclude that ethereum is the main chain and Polygon is the side chain.
There exist somewhat of a bridge that connects these two chains. This bridge converts assets from one chain to another by locking the asset on one side and unlocking it on the other side.
To better understand this comparison, we need to discuss the biggest difference between these blockchains.
Polygon VS Ethereum: Gas Fees
One unique value proposition of Polygon is that you don’t need to pay insane gas fees to mint an NFT.
There are no gas fees directly associated with using Polygon on OpenSea. However, to buy an NFT on Polygon, you still need to pay gas fees indirectly because NFTs on Polygon blockchain can only be purchased via Polygon ETH.
However, to get Polygon ETH, you need to bridge ETH over to Polygon, and to bridge, you need to pay a gas fee. So technically, there is a gas fee associated with Polygon, but this is less costly.
On the other hand, there are a lot of gas fees associated with ETH, hence making it impossible for people with small portfolios to do any swaps.
These gas fees can be categorized as one-time fees and recurring fees.
The one-time fees are subdivided into Initialization fee and Auction Approval Fee.
You need to pay a one-time initialization fee when you decide to sell NFT on ethereum via OpenSea. This fee is not fixed, as it depends on the current gas fee.
One amazing feature on OpenSea is that you can choose to auction an NFT instead of putting it out at a fixed price. However, to auction an NFT, you will need to approve the use of a special token called WETH ( Wrapped ETH ).
On the ethereum-blockchain, there are a lot of recurring fees. These fees occur every time you accept an auction offer, transfer an NFT, buy an NFT, cancel a listed NFT, cancel a bid and convert WETH to ETH.
On average, these fees cost between $50 to $200.
Polygon MATIC: Tradeoffs
It’s practically impossible to have a perfect product. Below are some of the tradeoffs associated with Polygon:
- No Auctions
On OpenSea, you can auction your NFTs instead of listing them out for a fixed price.
You can auction it off to the highest bidder, hence increasing your chances of selling for a better offer.
However, this is only available on the ETH blockchain. Polygon is currently working on having this on their blockchain.
2. Less Secure
This doesn’t mean the polygon blockchain isn’t secure at all. It just means that it is less secure when compared to ethereum.
3. Less Familiar
70% of NFTs lovers have heard of ETH, less than 30% have heard of Polygon. However, Polygon has been receiving some acceptance recently, and it’s only a matter of time before it will gain more popularity.
Using Polygon for the first time might be difficult for novice and non-technical people because not everyone knows how to bridge ETH to Polygon.
Hence it’s advisable that if you are launching your NFT on Polygon blockchain, endeavor to provide a step-by-step guide on how to go about the bridging.
Final Takeaway
Polygon is the best blockchain to launch an NFT project with high-frequency and low-value transactions. On the other hand, ETH is the best blockchain NFT project with low frequency and high-value transactions.
Hence if you are launching between 7,000 to 10,000 NFT arts, I’ll suggest you consider launching on Polygon.
Furthermore, if you are confident your NFTs will sell out even if they are expensive, you may choose Ethereum. However, If you are looking forward to saving money, you should consider Polygon.
I’ve observed that serious projects choose ETH blockchain because these gas fees create a barrier to entry, hence keeping out new and unserious investors. Besides, since you have to pay a gas fee to sell your NFTs, it is an incentive to hold on to your NFTs.
Polygon has already proven that low costs paired with faster transactions on the Ethereum blockchain are possible.
The future is bright, and I’m confident Polygon is here to stay. I’m eagerly looking forward to more developments and milestones achieved in this space.
However, we would probably be doing an Ethereum 2.0 Vs. Polygon in the coming years. Ethereum is currently working to make its network more scalable, safer, and sustainable.
Note: None of this should be taken as financial advice. It would be best if you always did your research before making a decision.
Web server is returning an unknown error Error code 520
There is an unknown connection issue between Cloudflare and the origin web server. As a result, the web page can not be displayed.
What can I do?
If you are a visitor of this website:
Please try again in a few minutes.
If you are the owner of this website:
There is an issue between Cloudflare’s cache and your origin web server. Cloudflare monitors for these errors and automatically investigates the cause. To help support the investigation, you can pull the corresponding error log from your web server and submit it our support team. Please include the Ray ID (which is at the bottom of this error page). Additional troubleshooting resources.
Cloudflare Ray ID: 80f4adeef34d2790 • Your IP: Click to reveal 45.84.122.7 • Performance & security by Cloudflare
OpenSea Ethereum vs Polygon: Which Blockchain to Prefer for Launching NFT
If you wish to sell an NFT at OpenSea, you must choose whether to sell it on the Ethereum or Polygon blockchain. It's an important decision to make because it will have an influence on your future production. Having a thorough understanding of your chosen blockchain will help you launch NFT rightly.
ThinkML Team
ThinkML Team is a group of AI experts who stay up-to-date on the latest research and developments in the field of AI in order to provide readers with exclusive and informational content.
More posts by ThinkML Team.
ThinkML Team
OpenSea is considered the first and largest marketplace for NFTs. It is primarily built on a well-known blockchain called «Ethereum». Though initially built on Ethereum, OpenSea now offers and supports non-Ethereum blockchains as well. One of the most emerging supportive blockchains is «Polygon, » creating hype in the NFT space. If you have an NFT that you want to sell at OpenSea, you have to decide whether you need to sell it on Ethereum or Polygon blockchain. This decision is critical to make as it will impact your future output. Therefore, a piece of complete beforehand knowledge about your selected blockchain will facilitate you in launching your NFT smoothly. This blog will deal with OpenSea Ethereum vs Polygon to highlight the differences between both blockchains and help you decide which one will be a perfect fit for your NFT.
What is a Blockchain, and How Does it Work?
You need a blockchain to create/mint an NFT. It is called a transaction when an NFT is minted by the creator/seller or purchased by the buyer. This transaction cannot be accomplished and approved without any blockchain. Hence, a blockchain is a digitally shared decentralized ledger that facilitates and records the process of each transaction and tracks digital assets across a network. The most widely used blockchain at OpenSea has been Ethereum, but now it is also offering a supportive blockchain called Polygon that is considered a layer-2 solution for Ethereum. Let’s discuss what caused the need to introduce the Ethereum-supported blockchain «Polygon», the pros and cons, and which one has the edge over the other in a particular scenario.
ThinkML Team ThinkML
What Factors to Consider Before Selecting a Blockchain?
Selection of the right blockchain that would best serve your NFT is a challenging task. To help you, we present some important factors that need proper consideration before going forward on a blockchain.
1. Gas Fee
Whenever a transaction occurs on a blockchain, it must approve this transaction to get forward. Each transaction needs some energy to get verified. A «Gas Fee» is charged to the miners for each transaction to reimburse this energy. This gas fee value fluctuates depending on the following factors:
- What is the demand for the blockchain?
If the demand for a blockchain is high, the gas fee will be high.
- How congested the blockchain is?
If it is overcrowded, more will be the gas fee.
- At what time you are going to mint your NFT?
During busy times of the day, when the network is overcrowded with users, the gas fee is higher. Therefore, it is recommended to mint or buy an NFT at slower times to get the transaction done at a lower price.
So before deciding on a blockchain, the Gas Fee is a must-consider factor.
ThinkML Team ThinkML
2. Transaction Speed
The transaction speed of a blockchain plays a significant role in making your NFT project successful. If the blockchain platform has low transaction speed, you will have to bear high costs against each transaction as the process will take a longer time to complete. You, as a seller, will not be the only one to bear the high cost, but the buyer will also have to bear it, which will ultimately affect the success of your project.
3. Three Intimidating Factors – the “Blockchain Trilemma”
Experts believe that if a blockchain possesses three fighting factors discussed below, it has the potential to facilitate a high transaction load and future growth. These factors include:
a) Decentralization– a blockchain must be decentralized to avoid control by a single individual or a group. Decentralization ensures more freedom to its users, even at the lower level, and they can fully control their transactions. It means that a user can initiate a transaction whenever he wants. He will not have to wait to get authorization from a centralized authority. It will ultimately save his time and efforts, ensuring a smooth transaction at each step.
b) Security– Blockchains are somehow vulnerable to getting attacked by scammers that can lead to your loss of money invested in an NFT project. To avoid security breaches, try to select a blockchain with previous records of upholding security. The blockchain you select must be using Proof-of-Stake, a tool of consensus mechanism to secure a blockchain. Moreover, the blockchain must be offering a “Smart Contract” to ensure complete security.
c) Scalability– A blockchain’s scalability refers to the potential of a network to grow in the future. It is the ability of a blockchain to facilitate the increased transaction load. If a blockchain is scalable, it shows that it can achieve a greater TPS (Transactions Per Second) in the future by adjusting its consensus mechanism.
ThinkML Team ThinkML
These three factors are called the “Blockchain Trilemma” that is seriously bothering the practitioners as most of the blockchains lack this trilemma. So, you must select a blockchain considering these qualities.
ETHEREUM Vs POLYGON
State that the main chain is Ethereum, while its supporting side chain is Polygon, it must not be wrong. To connect both chains, there is some sort of a bridge. The bridge locks the digital assets on one side and unlocks them on the other side. Hence, serves to transform one chain’s assets into another chain.
Let’s have a detailed comparison of both blockchains so you can overview the positives and negatives of each.
Ethereum
Ethereum is a decentralized blockchain to launch NFTs. It is an open-source platform that also allows the creation of a smart contract. This blockchain is known for launching the most popular NFTs as more people are acquainted with this blockchain.
Currency Used: ETH
Pros
- Auctions Facility – OpenSea allows its Ethereum users to sell their NFTs through auction rather than just selling at a fixed price. Hence, on the Ethereum blockchain, there are great chances to sell your NFT at a higher price by accepting the highest bidder’s offer.
- Highly Secured – This blockchain is more secure for any transaction. The high gas fee is used to relieve users from network scamming by creating an entry barrier for non-serious investors. Hence, the high gas fee is an incentive to keep your NFTs secure.
- Higher Gas Fee – A higher gas fee at a current value of $1.823 per transaction is the main disadvantage for Ethereum users.
We can categorize Gas Fee into two types:
1. One-time fees
2. Recurring fees
One-time Fees:
One-time fee further involves two types of fees:
1. Initialization Fee
2. Auction Approval fee
If you decide to launch your NFT on the Ethereum blockchain, you will have to pay a one-time account initialization fee. This fee is based on the current gas fee; therefore, it is not fixed.
To auction your NFT, you need a special token, «Wrapped Ethereum» (WETH). Before using this token, you need to get approval for the auction. This approval demands some fee that is called “Auction Approval Fee.»
Recurring Fees:
Once you put your NFT for auction, you will be charged a fee every time you like an auction offer and accept it. After accepting the offer, you will again be charged a fee when you transfer your NFT to the buyer. If you cancel an NFT after listing it at the marketplace or cancel a bid, you will again pay some fee to convert WETH to ETH. This fee you as a seller have to pay on each transaction is called a «Recurring fee.» The buyer also has to pay this recurring fee every time he buys an NFT from Ethereum.
Overcrowded Blockchain– As Ethereum is a highly crowded blockchain where numerous transactions occur simultaneously. This congestion is another factor for the high gas fee on Ethereum.
Lack of Scalability– It lacks scalability as its transaction speed is low because it is highly congested. It can process a maximum of 17 transactions/second.
ThinkML Team ThinkML
Polygon
Polygon refers to a decentralized blockchain scalability platform that helps connect and build blockchain networks compatible with Ethereum. It would not be wrong to call it a “replacement for Ethereum.” The motive behind the development of Polygon was to utilize sidechains to fix the Ethereum issues of high gas fees and lack of scalability. Polygon whitepaper claims that they were the first to manage the main issues linked with Ethereum, including network congestion and huge gas fee.
Polygon, an India-based blockchain, was cofounded in 2017 by Jaynti Karani, Anurag, and Sandeep. It adjusted the Ethereum-associated problems by implementing a Layer-2 solution that allowed the users to get Ethereum’s transaction verification at a minimum cost.
Currency Used: Polygon ETH
Pros
- Cheap standard gas fee – It is the main positive factor that counts a lot for an NFT seller. The Polygon network charges a standard gas fee of just $0.1 to $0.5 per transaction. The highest gas fee recorded on the polygon blockchain for all transactions is 9.50 MATIC (15.86USD). At the same time, the standard gas fee on Ethereum starts from 25USD.
- Quick Transactions Finality – The transaction finality is the affirmation that all the transactions occurring on a blockchain are completed successfully and can’t be reversed now. Being built to sidestep network congestion, Polygon completes all the transactions faster than Ethereum. Polygon can process up to 65,000 transactions/second. Polygon has a transaction finality of 2.3 seconds for each transaction, while Ethereum has 10 seconds. So, you may complete the whole process in quite a shorter time if you use Polygon.
Cons
- Lack of Familiarity – Numerous users do not know about Polygon as it is less popular in the NFT space. 70%of NFT enthusiasts are familiar with Ethereum, whereas those familiar with Polygon are just 30%. Therefore, it may indulge you in trouble if you are going to sell your NFT to people who do not recognize this blockchain. They may hesitate to purchase your NFT. Moreover, while they purchase NFTs with Polygon, they will have to do extra steps like adding Polygon currency to their crypto wallet or changing their ETH to Polygon ETH (WETH).
- Lack of Security – As Polygon does not charge a high gas fee to its users, it is less secure comparatively.
- No Auctions – You have to sell your NFT at a fixed price as OpenSea does not offer the auction option to its Polygon users.
ThinkML Team ThinkML
Under what circumstances Ethereum is an Ideal Choice?
1. If your audience is large and diverse but quite new to NFTs, it’s preferable to go with Ethereum.
2. If you have low frequency but high-end NFTs, select Ethereum as it ensures more security.
3. If you feel confident that your NFT has a great chance to stand out even being more expensive, go for Ethereum.
Under what circumstances Polygon is an Ideal Choice?
1. If you have a large audience that has been in the NFT space for a quite long time.
2. If you plan to sell your NFT at cheaper prices, as it is ideal for low-value transactions.
3. If you have a high-frequency NFT project. For instance, if you are going to launch 7000-10,000 NFTs, Polygon would be a perfect fit because of its lower gas fee and cost.
Polygon – An Overall Advantageous Blockchain
Polygon is the new buzz in the NFT space. Its popularity is gradually increasing. Based on the limitations posed by Ethereum, many experts claim that Polygon is its best alternative and preferable.
What confirms Polygon as an Emerging/Preferable Blockchain? The Most Recent Developments
In 2021, Polygon emerged as one of the winners as its price which was $0.01 in January, raised to $2.92 by December. Today, Polygon has become the buzz of the crypto space and is preferred over Ethereum. Here are a few persuasive reasons behind Polygon hype!
- “Seven Seven Six” by Alexis Ohanian (Reddit co-founder), has recently collaborated with Polygon and introduced an initiative worth $200 million to support gaming and social media on Polygon.
- DraftKings – an American sports betting platform providing online fantasy sports contests, has become a Polygon Validator in March 2022 after partnering with Zero Hash– a digital asset startup. Hence, DraftKings (NASDAQ: DNKG), worth $23 billion, is now responsible for verifying Polygon transactions. DraftKings has also launched its NFT marketplace on Polygon that features an autograph collection.
- Polygon hits a new milestone by running over 7,000 decentralized apps (dApps) on its network that were just 3,000 in Oct-2021. – a well-known crypto exchange platform, also plans to incorporate Polygon PoS (Proof of Stake) as their scaling solution.
- Several metaverses, including Decentraland, have integrated Polygon to get a scaling solution.
- Polygon allows decentralized exchanges like UniSwap and SushiSwap to trade their coins without depending on any intermediary.
- Polygon’s scalability and lower transaction fee has made it a choice for the big Web3.0 platforms ranging from DeFi projects like Aaveto Dolce & Gabbana – a luxury fashion house.
ThinkML Team ThinkML
Statistical Confirmation
Users started to trade NFTs on Polygon in July 2021. According to Simran Gogia, the Polygon analyst, NFT trading volumes on the Polygon blockchain of OpenSea reached 78.9 million USD in January 2022, where 102,000 trades were being accomplished per day. Dune Analytics verifies Gogia’s statement and claims that Polygon growth in January was 4% higher than December 2021 and 65% up than July 2021. Gogia, in the tweet thread, further reveals that the selection of Polygon rather than Ethereum blockchain helped users save 7.18 million USD per day or 70 USD per transaction.
All these recent developments and statistical proof regarding Polygon demonstrate an upward trend. Experts claim that Polygon has a shining future. With the crypto space becoming more extensive, Polygon has huge potential for continuous development.
Final Takeaway
Learning about blockchains is undoubtedly a long process, yet rewarding and exciting. Selecting blockchain for launching your NFT depends on several factors, including your objectives and audience.
It’s better to launch your first NFT on Ethereum, but it has several associated issues. Polygon is a resourceful troubleshooter for these issues, which sometimes delivers poor customer experience. Based on a massive user base, Ethereum is often congested. The more the network is clogged, the more expensive transactions would be. To address all these concerns regarding Ethereum, Polygon has turned up as a conqueror that serves to save the day. More excitingly, OpenSea has recently announced that it is going to introduce an NFT marketplace on Polygon that would be free from any Gas Fee. So, if you have a huge collection of NFTs and plan to sell them to a niche audience, Polygon is the best choice as it charges minimal or almost no gas fee. Polygon can be said to be a Layer-2 solution to Ethereum, enabling you to arrange Ethereum Smart Contracts through its network. Though Polygon is comparatively less familiar, its acceptance is increasing and is likely to gain more popularity in a matter of time. No doubt, the future is bright for both blockchains. However, with all the benefits and recent trends discussed in the blog, I’m sure “Polygon” has a long way to go.